Features:
● Spectrum Analysis Frequency Range: 9khz~2.1ghz/3.6ghz/8.4ghz
● Shows Average Noise Level Danl Below -161dbm
● Minimum Resolution Bandwidth 1hz
● Phase Noise: <-98 Dbc/Hz@1 Ghz, 10 Khz Offset
● The Maximum Number Of Sweep Points Is 40001 Points
● Support For Advanced One-Button Measurement (Option)*
● Support Emi Pre-Scan Analysis Function (Optional)*
● Signal Modulation Analysis Support Analog Modulation Analysis (Option)*
● Support For Tracking Source Output Function (Option)*
● 10.1-Inch 1280×800 Hd Capacitive Touch Display
Features:
1. 10.1-Inch 1280×800 Hd Capacitive Touch Display, Support Gestures Such As Zooming, Expanding, Dragging And Other Gestures On The Spectrum Trace, Touch Editing The Menu, Etc
2. Time Domain Measurement Is Carried Out Through "Zero Sweep Width", And The Modulation Waveform, Modulation Frequency And Modulation Depth Of Am Modulation Signal Are Measured.
3. The Frequency Scan Points Are Up To 40001, And More Scan Points Provide Higher Resolution
4. Power And Frequency Measurement: Set The Appropriate Center Frequency, Sweep Width, Reference Level And Input Attenuation, Etc., And Mark The Amplitude And Frequency Of The Signal Through Peak Search.
5. Six Traces: Clearly Observe And Compare The Spectral Changes After Changing Rbw Through Different Colored Traces
6. A Variety Of Detection Methods: Positive Peak, Negative Peak, Sampling, Standard, Average, Quasi-Peak And Other Detection Methods
7. Excellent Phase Noise: <-98 Dbc/Hz@1ghz, 10 Khz Offset
8. Excellent Selectivity Is Less Than 4.8:1
9. Advanced Power Measurement To Calculate Acpr Adjacent Channel Power Ratio
10. Waterfall Chart: You Can Intuitively View The Power Components Of Each Frequency Point In The Specified Frequency Domain
11. Emi Pre-Compatibility And Conformance Test
Basic Parameters
General Technical Specifications
Power Supply
Supply Voltage
100V~240VACrms
Frequency
50Hz/60Hz
Fuse
3A, Class T, 250V
Display
Display Type
10.1 inch touch TFTLCD
Display Resolution
1280 horizontal × RGB× 800 vertical pixels
(W×H×D)
378mm×218mm×120mm
Weight
4.55kg
Technical Indicators
Basic Functions
UTS3021B
UTS3036B
UTS3084B
UTS3084T
Full-Amplitude Accuracy
20°C~30°C, Fc>100kHz, input signal level: -50 dBm~0dBm, RBW=1kHz, VBW=1kHz, Peak detection, input attenuation 20dB, preamplifier off, 95% confidence ±0.7 dB
Vswr (10db Input Attenuation)
1MHz~2.1GHz <1.5
1MHz~3.6GHz <1.5
1MHz~8.4 GHz <1.5,标称值
Distortion And Spurious Response
Second Harmonic Distortion
fc≥50 MHz, mixer level -30 dBm, input attenuation 0 dB, preamplifier off, 20°C to 30°C
-65dBc
Third-Order Intermodulation Cut-Off Point
20°C to 30°C, fc≥50 MHz, Input Dual Tone Level -20dBm, Frequency Interval 100kHz, Input Attenuation 0dB, Preamp Off
+10dBm
1db Gain Compression
fc≥50 MHz, input attenuation 0 dB, preamplifier off, 20°C to 30°C
>-5dBm, nominal
Remaining Responses
The input port is connected to a 500 load, and the input attenuation is 0dB, 20°C to 30°C
<-90dBm, typical
Enter The Relevant Spurs
The Mixer Level Is -30dbm, 20°C To 30°C
<-65 dBc
Scan & Trigger
Scan Time
1ms到4000s
Scanning Accuracy
Precision, Speed
Scan Mode
Sweep, FFT
Scan Rules
Continuous, single
Trigger source
Free, Video, External
External Trigger Settings
Level (5V TTL), rising/falling edge
Trace The Source
Frequency Range
100 kHz~2.1GHz(Matching)
100 kHz~3.6GHz(Matching)
100 kHz~6GHz (standard)
RBW
30 Hz~1mhz, Only Support Scanning Mode
Output Level Range
-20 dBm~0 dBm
Output Level Resolution
1dB
Output Flatness
+/-3dB
Maximum Reverse Input Level
Average power: 30 dBm, DC: ±50VDC
Power Measurements
Channel Power
Channel Power, Power Integration Density
Adjacent Channel Power Ratio
Primary Channel Power, Left Adjacent Channel Power/Power Ratio, Right Adjacent Channel Power/Power Ratio
Occupies Bandwidth
Occupied Power, Transmission Frequency Error
Time-Domain Power
Zero-Sweep Time Integration Power
Carrier-To-Noise Ratio
Carrier Power, Noise Power
General Parameters
Carrier Frequency
2MHz~2.1GHz
2MHz~3.6GHz
2MHz~8.4GHz
Carrier Power Accuracy
±2dB
Carrier Power Range
-30dBm~+20dBm
Generic Interfaces
The Front Panel Tracks The Source Output
50Ω, N-type female
10MHz reference input
10 MHz, >0dBm, 50Ω, BNC-type female
10MHz reference output
10 Mhz, -5dbm~ 10 Dbm, 50ω, Bnc Type Female
External Trigger Input
1kQ, 5VTTL, BNC type
Hdmi Display
Hdmi1.4 Display Interface
Communication Interface
USBHost
USB-A 3.0
USB Device
USB-B2.0
LAN
LAN(VXI11),10/100/1000Base,RJ-45
Basic Functions
UTS3021B
UTS3036B
UTS3084B
UTS3084T
Measure The Frequency Range
9kHz-2.1GHz
9kHz-3.6GHz
9kHz-8.4GHz
Resolution Bandwidth
1Hz~3MHz,1-3-10 steps
1Hz~3MHz,1-3-10 steps
1Hz~3 MHz,1-3-10 steps
Displays the average noise level
-161dBm, normalized typical
Phase noise
<-98dBc/Hz@1GHz, 10kHz offset, typical
Trace Source (Optional)
100 kHz~2.1GHz
100 kHz~3.6GHz
100 kHz~6GHz
Full-Amplitude Accuracy
<0.7dB
Frequency
Frequency Range
9kHz-2.1GHz
9kHz-3.6GHz
9kHz-8.4 GHz
Frequency Resolution
1Hz
Frequency Sweep Width
Sweep Range
OHz,100Hz~2.1GHz
OHz,100Hz~3.6GHz
OHz,100Hz-8.4GHz
Sweep accuracy
± Scan Width/(Scan Point -1)
Internal reference sources
Base frequency
10.000000MHz
Reference frequency accuracy
± [(Time since last calibration× Frequency aging rate) Temperature Stability Initial Accuracy]
Initial accuracy
≤1ppm
Temperature stability
<1ppm,0℃~50℃
Frequency aging
< 0.5ppm/first year, 3ppm/20 years
cursor
Cursor frequency resolution
Sweep Width/(Scan Points-1)
Cursor Frequency Uncertainty
± [Cursor Frequency Reading× Reference Frequency Accuracy 1% × Scan Width 10% ×Resolution Bandwidth Cursor Frequency Resolution]
Cursor type
Regular, Difference, Difference Pair, Relative
Cursor Function
Noise cursor, NdB bandwidth
Frequency counter resolution
1Hz
Frequency Counter Uncertainty
± [Cursor Frequency Reading× Reference Frequency Accuracy Frequency Counter Resolution]
Bandwidth
Resolution Bandwidth (-3db)
1hz~3mhz, 1-3-10 Steps
Resolve Filter Form Factor
<4.8:1 (60db:3db), Gaussian-Like
Resolution, Bandwidth, Uncertainty
<5%
Video bandwidth (-3dB)
1Hz~3MHz, 1-3-10 steps
Video Bandwidth Uncertainty
<5%
Amplitude And Level
Amplitude measurement range (preamplifier off)DANL到+10dBm DANL到+20dBm
100kHz~1MHz 1MHz~2.1GHz
100kHz~1MHz 1MHz~3.6GHz
100kHz~1MHz 1MHz~8.4GHz
Reference Level
-100 dBm to 30 dBm in 1 dB steps
Preamplifier (20 Db, Nominal)
9kHz~2.1GHz
9kHz~3.6GHz
9kHz~8.4 GHz
Enter Attenuation
0~51db, 1db Steps
Maximum Input Dc Voltage /-50vdc
Maximum CW RF power
33 dBm, 3 minutes, input attenuation > 20 dB
Level Display Range
Displays Log-Level Coordinates
10 Db To 100 Db
Displays Linear Level Coordinates
0 To The Reference Level
Level Coordinate Units
dBm,dBmV,dBμV,V,W
Number Of Scan Points
40001
Number Of Traces
6
Detection Method
Positive Peak, Negative Peak, Sampling, Standard, Average (Voltage/Rms/Video), Quasi-Peak
Trace function
Clear Write, Max Hold, Min Hold, View, Off, Average
Frequency Response
The preamp is off
20°C~30°C, 30%~70% relative humidity,
The input attenuation is 20dB and the reference frequency is 50 MHz
±0.8dB;±0.4 dB,Typical
The preamp is on
±0.9dB;±0.5 dB,Typical
Error Vs. Accuracy
Resolution-bandwidth switching error
The logarithmic resolution of RBW relative to 10kHz ± 0.2dB, and the linear resolution ± 0.01, nominal
Enter the attenuation error
20°C~30°C, fc=50 MHz, preamplifier off, attenuation relative to 20 dB, input attenuation 1~51dB
±0.5 dB
Absolute amplitude accuracy
20°C~30°C, fc=50 MHz, RBW=1kHz, VBW=1kHz, peak detection, input attenuation 20dB
The preamp is off
±0.4 dB,Input signal level-20dBm
The preamp is on
±0.5dB,Input signal level-40dBm
