Features:
● Maximum frequency: 4.5GHz/6.5GHz
● Output frequency resolution: 0.001Hz
● Level setting range from -135dBm to 25dBm, -60dBc spurious suppression
● Phase noise<-122dBc/Hz@1GHz, offset by 20kHz (typical)
● Support AM/FM/PM/φM analog modulation, internal/external/internal external modulation
● Support frequency/amplitude/frequency amplitude sweep type
● Built-in 50MHz function signal generator, support basic waveform output, modulation, and frequency sweep
● Standard USB, LAN communication interface, support SCPI programmable instrument commands
● Support Web remote login management
Features:
1. Comprehensive analog modulation scheme
2. Diversified scanning modes
3. Comprehensive analog modulation scheme
4. Peripheral power meter for quick measurement
5. 5-inch capacitive touch screen 800*480
6. Multi-dimensional control mode
Technical Indicators
| Model | USG3065M-P | USG3065M | USG3045M-P | USG3045M |
| Frequency range | 9kHz~6.5GHz | 9kHz～4.5GHz |
Frequency resolution | 0.001Hz |
Mechanical attenuators | √ | - | √ | |
Reference output |
frequency | 10MHz |
amplitude | > 4dBm nominal, 50Ω load |
External reference input |
Enter the frequency | 10MHz |
Stability | Depends on the stability of the external reference input signal |
Synchronization range | ±10ppm |
amplitude | >-3.0 to 20dBm nominal |
impedance | 50Ω nominal |
waveform | Sine wave or square wave |
Scan Mode (Frequency and Amplitude) |
Working mode | Step Scan, List Scan |
Scan range | in the frequency range of the instrument |
Dwell time | 1ms to 100s |
Points | 2 to 65535 step scans |
1 to 3201 list scanning |
Level output parameters |
Configurable range | -135dBm to 25dBm |
resolution | 0.01dB |
Programmable Attenuator (Option) | 0 to 110dB in 10dB steps |
connector | N type 50 Ω, nominal |
External modulation input |
MOD | AM,FM,PM(50Ω) |
PULSE | Pulse Modulation (50Ω) |
Intrinsic Function Generator (LF) |
waveform | Sine wave, square wave, pulse wave, triangle wave, arbitrary wave, DC, noise |
Frequency range | sinusoid | 0.01Hz to 50MHz |
Square waves, triangular waves, sawtooth waves | 0.01Hz to 5MHz |
Frequency resolution | 0.01Hz |
Frequency accuracy | Same as RF reference source, nominal |
LF audio output | 0 to 1V peak, 50Ω |
LF frequency sweep |
Sweep mode | Linear, logarithmic |
Scan status | Zigzag waves, triangular waves |
Sweep direction | Up, down |
Scan time | 1ms to 500s |
Scan frequency range | 0.01Hz to 1MHz |
Trigger mode | Automatic, key-triggered, externally triggered, bus-triggered |
Mechanical Specifications: |
size | 426mm×88mm×400mm (W×H×D) without protection |
Adjust the interval | The recommended calibration interval is one year |
