Features:
● Number of channels: 2
● Bandwidth: 100MHz/200MHz
● Sampling rate: 1GSa/s (non-interleaved mode)
● Waveform capture rate up to 500,000 wfms/s (Fast Acquire)
● Storage depth: 56Mpts (per channel) as standard
● XY Li Shayu waveform phase measurement
● Innovative RS-232, I2C, SPI, CAN and LIN full memory hardware real-time decoding
● Multi-Scopes 2.0 supports dual-channel independent triggering of fluorescence display
● 7 inch WVGA (800×480) TFT LCD screen
● Web Control supports remote control over the Internet
● Support SCPI programmable instrument standard commands
● 1M point enhanced FFT function, support frequency setting, waterfall chart, detection setting and marker measurement, etc
● Support the NeptuneLab experimental system comprehensive test platform
Features:
1. 256 levels of grayscale display
2. Ultra-high capture rate of 500,000wfms/s
3. XY (Li Shayu waveform phase measurement)
4. Up to 56Mpts deep storage
5. Serial bus triggering and hardware decoding (RS-232/I2C/SPI/CAN/LIN)
6. 1M sampling point enhanced FFT
7. Multi-Scopes2.0 supports dual-channel independent triggering fluorescence display
8. Embedded Web Server, no need to install software can be realized through the browser Cross-platform can remotely control the instrument, observe the waveform, and obtain measurement results
Technical Indicators
Basic functions
UPO6102Z
UPO6202Z
Analog bandwidth
100 MHz
200 MHz
Number of channels
2
Real-time sampling rate
1GSa/s (non-interleaved mode)
Storage depth
56Mpts per channel
Waveform capture rate
150,000 wfms/s (normal acquisition); 500,000 wfms/s (Fast Acquire mode)
Vertical Sensitivity (V/div)
1mV/div~20V/div(1MΩ)
Time Base Range (s/div)
2ns/div~1000 s/div
1ns/div~1000 s/div
Input impedance
(1MQ±2%) || (18 pF±3pF)
DC gain accuracy
±3% full scale
Waveform recording
Up to 100,000 frames of waveform data can be recorded
FFT points
1M
Trigger type
Edge Trigger, Pulse Width Trigger, Slope Trigger, Alternate Trigger, Video Trigger, Delay Trigger, Timeout Trigger, Pattern Trigger, Duration, Build/Hold,
Underamplitude pulse trigger, Excess amplitude pulse trigger, RS-232, I²C, SPI, CAN, LIN
Serial bus triggering and decoding
RS-232、I²C、SPI、CAN、LIN
Waveform arithmetic
A B, A-B, A× B, A/B, FFT, editable advanced operations, logical operations
Automatic measurements
Maximum, Minimum, Top, Bottom, Median, Peak-to-Peak, Amplitude, Average, Periodic Average, Root Mean Square, Periodic Root Mean Square, Area, Cycle Area, Overshoot, Preshoot, Frequency, Period, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Rise Delay, Fall Delay,There are 36 measurement parameters such as phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, and the number of pulses Measurement data
5 measurements are displayed at the same time
Measurement statistics
Mean, maximum, minimum, standard deviation, and number of measurements
Frequency meter
Hardware 7-bit frequency meter
Standard interface
USBHost、USB Device、LAN、EXT Trig、AUX Out(Trig Out/、Pass/Fail)
NeptuneLab System
Support intelligent open laboratory management system
power supply
100V~240VACrms,50Hz/60Hz
display
7 inch TFT LCD, WVGA (800×480)
Body color
White, gray
Fuselage weight
3kg
(W×H×D)
306mm×138mm×107mm