Features:
● 100MHz/200MHz bandwidth, 2 analog channels
● Storage depth 64kpts, sampling rate 1GSa/s per channel (non-interleaved mode)
● Waveform capture rate: 5,000wfms/s
● Automatic measurement of 34 waveform parameters
● Wider display range 8div×16div
● Multi-frequency standard square wave output: 10Hz, 100Hz, 1kHz, 10kHz
● Equivalent sampling/real-time sampling can be switched arbitrarily
● Li Shayu waveform phase measurement
Features:
1. A variety of frequency output standard square wave is optional
2. Wider display range 8div×16div
3. Automatic measurement of a variety of waveform parameters
4. A variety of trigger functions (alternate triggering in the figure), suitable for complex test environments
5. Li Shayu waveform phase measurement
6. Rich Math functions: mathematical operation, FFT, digital filtering
Basic parameters
Display type | 7 inch TFT LCD |
Display resolution | 800 horizontal × RGB× 480 vertical pixels |
(WXH×D) | 306mm×138mm×124mm |
weight | 2.5kg |
Accessories are standard | National standard power cable, USB data cable, probe × 2, warranty certificate, general file download operation guide |
Technical Indicators
Basic functions | UTD2102CEX+ | UTD2202CEX+ |
Analog bandwidth | 100MHz | 200MHz |
Number of channels | 2 |
Maximum real-time sampling rate | 1GSa/s (non-interleaved mode) |
Rise time | ≤3.5ns | ≤1.8ns |
Storage depth | 64kpts |
Waveform capture rate | 5,000wfms/s |
Vertical Sensitivity (V/div) | 1mV/div~20V/div |
Time Base Range (s/div) | 2ns/div-50s/div |
Storage | Settings, waveforms, bitmaps |
Trigger frequency meter | Hardware 8-Bit Frequency Meter |
Trigger type | Edge, Pulse Width, Slope, Video, Alternate |
Trigger mode | Automatic, Normal, One-Time |
Trigger coupling | DC, AC, high-frequency suppression, low-frequency suppression, noise suppression |
Cursor measurements | Time, voltage, tracking |
Parametric measurements | 34 waveform parameters are automatically measured |
MATH | 、-、×, ÷, FFT, digital filtering |
Digital filtering | Low-pass, high-pass, band-pass, band-pass |
Set up | 20 settings (internal), 200 settings (USB flash drive) |
waveform | 20 waveforms (internal), 200 waveforms (USB flash drive) |
Number of frames recorded | 1000 frames of screen data |
interface | USB Host, USB Device, Pass/Fail, LAN (Optional) |
Maximum Input Voltage (1MQ) | 300 Vrms, transient overvoltage 1000 Vpk |
The probe compensates for the signal output voltage | Approx. 3Vp-p (at ≥1MΩ) |
The probe compensates for the signal frequency | 10Hz,100Hz,1kHz,10kHz |
